Norstar Voice Mail 4.0 Page 83 Set Up And Operation Manual Download

Page: 83 / 258

Special Mailboxes: General Delivery and System Coordinator

P0886600 Issue 1.0

Set Up and Operation Guide

To send a copy of a message to a mailbox owner, you must open the mailbox and
listen to the message.

1. Press

⁄ .

2. Enter the System Coordinator Mailbox number

and password, then press

3. Press

PLAY

4. Press

COPY

If the display does not show the

COPY

option,

press

fi to continue to the next display.

5. Press

YES

Press

to copy the message without an

introduction. The display changes to show:

Mbox:

6. At the tone, record the message introduction.

The introduction to a message must be more
than three seconds long.
Press

to end the recording.

7. To accept the recording, press

SEND

To listen to your introduction before you send
the message, press

PLAY

To record the introduction again, press

RETRY

8. Enter the mailbox number that is to receive the

message
or
press

DIR

to select the mailbox number using

the Company Directory.

9. To deliver your introduction and message

normally, press

SEND

or
to select sending options, press

OPTS

Pswd:
OTHR RETRY

1 new 0 saved

REC ADMIN

End of message

ERASE NEXT

Record intro?

Record intro:
RETRY

Accept intro?
RETRY PLAY

Mbox:
DIR QUIT

Name:

CC SEND

Summary of Contents for Voice Mail 4.0



































































































































































































































































Search results

Summary of Contents for Voice Mail 4.0

Reviews:

Related manuals for Voice Mail 4.0

Brands by name

Popular brands

Norstar Voice Mail 4.0, Set Up And Operation Manual

Search results

Summary of Contents for Voice Mail 4.0

Reviews:

Related manuals for Voice Mail 4.0

Brands by name

Popular brands