Norstar Voice Mail 4.0, Set Up And Operation Manual

Page: 221 / 258

Appendix A: Dialing Translation
207
P0886600 Issue 1.0 Set Up and Operation Guide
Loading the files onto the DOS system disk
To load the files onto the DOS system disk:
1. Insert the DOS system disk that you created earlier into the floppy disk drive
of your computer.
2. Use the Change Directory command (CD) to move to the directory where the
Dialing Translation Table file is stored.
3. Type copy dial.30 a:\dial.30 to load the Dialing Translation
Table file onto the DOS system disk.
4. Use the Change Directory command (CD) to move to the directory where the
Autoexec.bat file you created is stored.
5. Type copy autoexec.bat a:\autoexec.bat to load the
autoexec.bat file onto the DOS system disk.
Loading the Dialing Translation Table file onto the Norstar Voice Mail system
To load the Dialing Translation Table file onto the Norstar Voice Mail system you
must shut down Norstar Voice Mail and then reboot the system using the DOS
system disk you created.
A Norstar two-line display telephone is required to perform the following steps.
To load the Dialing Translation Table file:
1. Press
ƒ · ⁄ fi .
2. Enter the default password
¤¤¤‹‡‡¤ (ACCESS2) and press
OK .
3. Press NEXT .
4. Press SHOW .
5. Press GRACE .
Password
RETRY
ACCESS Server
BACK
ADMIN
System shutdown
BACK NEXT
Shutdown type
QUIT NEXT