Norstar Voice Mail 4.0, Set Up And Operation Manual

Page: 44 / 258

30
Setting up an Automated Attendant
Set Up and Operation Guide P0886600 Issue 1.0
Changing the Norstar Voice Mail language availability
When Norstar Voice Mail was installed, the language of the Automated Attendant
was set by the installer.
When the Norstar Voice Mail bilingual option is set to
N
, there is no Alternate
Language capability, and all the Classes of Service are assigned the Primary
Language selected. This means a caller who presses
· when using the Automated
Attendant is told the command is not recognized.
To change the Norstar Voice Mail language availability, and the Primary and
Alternate Languages:
1. Press
ƒ · ° ‹ .
2. Enter the System Coordinator Mailbox number
and password, then press
OK
.
3. Press
¤ .
4. Press
CHNG
to toggle the setting and select
N
for
No, or
Y
for Yes.Press
CHNG
to toggle the
setting and select
N
for No,
or
Y
for Yes.
5. Press
NEXT
.
6. Press
OK
to select English as the Primary
Language, or press
CHNG
to select French or
Spanish as the Primary Language. Press
OK
to
select English as the Primary Language, or
press
CHNG
to select French or Spanish as the
Primary Language.
7. Press
OK
.
8. Press
OK
. For information about Group Lists
and Leading Digits, refer to "Broadcast and
Group messages" on page 97.
9. To configure any changes you made, press
OK
.
10. The system is now configured with the changes
you made.
Press
®
to end this programing session.
Log:
QUIT RETRY
Admin
MBOX AA OTHR
Bilingual: N
NEXT
Bilingual: Y
CHNG
Prim lang: eng
OK
Group lists:Y
CHNG OK
Leading Digits:9
CHNG
System config
RETRY
Admin
MBOX AA OTHR