Norstar Voice Mail 4.0 Set Up And Operation Manual Download

Page: 197 / 258

P0886600 Issue 1.0

Set Up and Operation Guide

Norstar Voice Mail Troubleshooting

Overview

This chapter on Norstar Voice Mail troubleshooting is divided into the following
sections:

•

system trouble

•

operating trouble

•

Custom Call Routing (CCR) trouble

•

error messages

System trouble

System trouble consists of problems occurring to more than one mailbox owner and
to both internal and external callers.

Automated Attendant does not answer any calls

1. Verify that you have assigned the lines to the Greeting Table, and the line is

designated as YES. This means that Norstar Voice Mail is set to answer the
line.

2. All the Norstar Voice Mail channels may be busy. Try calling back. Your call

will be answered when a channel is available.

3. Verify that greetings 1 to 4 have been recorded. These greetings default to the

Greeting Tables and must be recorded for the Automated Attendant to operate.
Refer to

"Setting up an Automated Attendant"

on page 19.

4. If the Norstar Voice Mail channels are frequently busy, it indicates there is too

much activity. Contact your advice line or sales representative.

Call display information is lost

The Automated Attendant must be set to answer after two or more rings for Norstar
Voice Mail to record call log information related to an incoming call. For
information about setting the number of rings, refer to

"Assigning the number of

rings before Norstar Voice Mail answers"

on page 32.

Summary of Contents for Voice Mail 4.0



































































































































































































































































Search results

Summary of Contents for Voice Mail 4.0

Reviews:

Related manuals for Voice Mail 4.0

Brands by name

Popular brands

Norstar Voice Mail 4.0, Set Up And Operation Manual

Search results

Summary of Contents for Voice Mail 4.0

Reviews:

Related manuals for Voice Mail 4.0

Brands by name

Popular brands