©2005 Nordic ID Oy
Nordic ID PL3000 user manual, v. 2.4, March 2006
91
Networks within reach are listed below Add New… -selection.
Note: If the network is configured as not visible, it cannot be seen in this window. Open the network con-
figuration window by tapping the desired network or Add New…-selection in the listbox . Fill the wireless
properties with the information provided by your network administrator. Save the settings and close the
window by tapping the OK-box at the top of the window.
After configuring the wireless properties, choose the network to be connected from the listbox and tap the
connect -button. The PL3000 tries to connect the selected network and indicates the connection status
at the window below the Available networks –listbox. Also the signal strength of the selected network is
shown.
Network Monitor window
The Network monitor application can be opened from Programs – WCF54G Wireless Network Monitor. This
application shows the status of the current network connection, tools for network management and trou-
bleshooting and controls for wlan radio power.
Fig: Detected networks in range. NID_
WLAN is being connected. Authori-
sation process in progress.
Fig: Wireless properties -window. Enter
the network settings here.
Fig: Network monitor -window.