Nordic ID PL3000 User Manual Download | Manualshive

Page: 73 / 91

background image

©2005 Nordic ID Oy
Nordic ID PL3000 user manual, v. 2.4, March 2006

73

7.3

Batteries

The PL3000 contains a removable Lithium-Ion battery pack. Please follow the instructions below when
handling the battery pack:

•

Use only original battery packs available from Nordic ID or from authorised dealers.

•

Replace a defective battery pack immediately to prevent possible damage to the unit.

•

Never short-circuit the battery pack terminals or throw the battery pack into a ﬁre as this may

cause an explosion.

•

Excessive discharge may cause permanent degradation of the battery’s performance. Battery

charging should be done immediately after the unit indicates a low battery status.

The battery pack does not require any special maintenance.

7.4

Charging and electrical safety

Before using the PL3000 charger check that all the cords and connections, covers of charger and PL3000
are undamaged. Any damages may risk the safe use of the device.

8

Warranty

Please read these warranty and safety related warnings carefully before taking the product into use:

Warranty will be void, if the product is used in any way which is in contradiction with the instructions given
in this User Manual, or if the housing of the PL3000 has been opened or tampered.

The devices mentioned in this manual are to be used only according to the instructions described in this
manual. Faultless and safe operation of the devices can be guaranteed only if the transport, storage,
operation and handling of the devices are followed. This also applies to the maintenance of the products.
The PL3000 contains no user serviceable parts inside the actual case apart from the battery pack and SD/
MMC card located inside the battery compartment.

«
...
71
72
73
74
75
...
»

Summary of Contents for PL3000




























































































Reviews:

No comments

Related manuals for PL3000

Brand: Wileyfox Pages: 38

Cintiq Companion 2

Brand: Wacom Pages: 64

Brand: Janam Pages: 67

Brand: BayNexus Pages: 10

Brand: BayNexus Pages: 12

Brand: ACTScom Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands