©2005 Nordic ID Oy
Nordic ID PL3000 user manual, v. 2.4, March 2006
64
The Codes tab includes the information about symbolism decoding. The enabling or disabling of the sym-
bolism can be selected by tapping the name of the code. Enabled codes are marked with
The Misc –tab includes the controls for sounds of the successful / unsuccessful decoding, postfix symbols
after the scanned code, decode limit time (the max time of decoding the symbolism from one image in ms),
scan timeout time (max time to scan the images in sec before the timeout), search limit time (max time to
search symbolism in image in ms) and video reverse checkbox (on/off).
Scan –tab can be used as a test area for code decoding. After scanning the symbolism the decoded info is
displayed on Result string –textbox. The information about decoding is shown in the Result info –textbox.
Also the AIMSI –information is shown below the result –textboxes.
In the Profiles –tab the selected changes can be saved as profiles or system defaults.
6.5.18 NID Tilt Switch
Fig.67 Codes -tab in the Scanned Configuration program
Fig.68 Misc -tab in the Scanned Configuration program
This configures the internal motion sensor to wakeup the device and/or keeping the device on. If Wakeup
automatically –option is checked, device wakes up to active mode when sensing motion.
The Keep alive –checkbox enables the keep alive –option which resets the timeout timers when sensing
motion.
