Nordco Trailblazer BC60, Operation And Maintenance Manual

Page: 7 / 72

BC 60 "Trailblazer" Brushcutter
SAFETY
OCT/2012 (49458202)
Section 1-1
SAFETY
Please read and comply with all of the
safety precautions in this manual BEFORE
operating this machine.
GENERAL
DO NOT use this machine for machine
operations other than for which it was
intended.
NORDCO is not responsible for any
modifications made without authorization or
written approval. Replace all NORDCO
and OEM parts with genuine NORDCO or
OEM parts. Use of non-OEM parts could
compromise the safety of your machine.
FRA regulations require that a copy of this
Operation Manual be kept on the machine
at all times. Additional copies of the
Operation Manual only can be ordered
from Nordco Parts Sales at 1-800-647-
1724.
FOLLOW SAFETY INSTRUCTIONS
Carefully read all safety messages in this
manual. Learn how to operate the
machine and how to use controls properly.
Do not let anyone operate this machine
without instruction. Failure to understand
the contents of this manual could result in
serious personal injury or death.
SAFETY ALERT SYMBOLS!
These are the safety-alert symbols.
These symbols means pay
attention! Your safety is at risk!
DANGER is used to indicate a definite
hazardous situation which, if not avoided,
WILL result in severe bodily harm or even
death.
WARNING indicates a potentially
hazardous situation which, if not avoided,
COULD result in severe bodily harm or
even death.
CAUTION indicates a potentially
hazardous situation which, if not avoided,
MAY result in minor or moderate injury.
CAUTION without the safety “!” means that
failure to follow the alert may result in
machine damage.
SAFETY means that the following points
are instructions for safely operating the
machine or the specific component of the
machine.
HAZARD DECALS ON THIS MACHINE
Hazard decals and plaques that have
been placed on this machine are to be
kept clean and legible. Replace any
decals or plaques that have become
illegible or are missing.