![background image](http://html1.mh-extra.com/html/nordco/trailblazer-bc60/trailblazer-bc60_operation-and-maintenance-manual_1701413051.webp)
MAINTENANCE
BC 60 "Trailblazer" Brushcutter
Section 3-6
AUGUST/2012 (49458202/8203)
T3. Transmission level
The type of service and the operating
conditions will determine the maintenance
interval. However,
it
is recommended that
the oil level be checked weekly, at the same
time checking for oil leaks.
Because the lubricant system is the heart of
the unit,
it
is especially important that the oil
be kept clean.
1. Stop engine before checking or adding oil.
2. Clean around oil fill plug
3. It is recommended that lubricating oil be
changed after the first 50 hours of service.
4. Thereafter, and under normal operating
conditions, it is recommended that the oil be
changed after every six months of operation.
The oil in the unit should be changed
whenever the oil level shows traces of dirt or
effects of high temperature, evidenced by
discoloration or strong odor.
6. Drain oil while the unit is still warm,
examining for contamination or metal
particles.
7. Clean all magnetic drain plugs before
replacing.
8. Always use clean oil in clean containers.
9. Do not overfill. This will result in
overheating and possible malfunction of the
unit.
10.
Fill with MIL-L-2105C or API-GL-5.
Transmission should hold approximately
2 quarts.
11. Maximum operating oil temperature 180
degrees F (82.22 Degrees
C).
12 Lubricate all transmission controls with a
good grade of lithium base grease.
Summary of Contents for Trailblazer BC60
Page 2: ......
Page 48: ...BC 60 Trailblazer Brushcutter MAINTENANCE AUGUST 2012 49458202 8203 Section 3 3...
Page 49: ...MAINTENANCE BC 60 Trailblazer Brushcutter Section 3 4 AUGUST 2012 49458202 8203...
Page 64: ...BC 60 Trailblazer Brushcutter MAINTENANCE MARCH 2011 49458201 Section 3 21 TORQUE REQUIREMENTS...