BC 60 "Trailblazer" Brushcutter
SAFETY
OCT/2012 (49458202)
Section 1-5
MACHINE SAFETY
ALERTS
DANGER ALERTS
Improper use of this machine for
any type of operation can cause
serious injury or death.
To avoid serious injury or death,
make certain that the area around
and under the machine is clear of
all personnel and obstructions
BEFORE travelling or working.
Serious injury or death can result
from reaching into working
components while machine is
running. Make all observations
from a distance and SHUT OFF
machine while making adjustments.
Shut off engine when checking
battery electrolyte level. Do not
check or fill battery in presence of
open flame, sparks, or when
smoking. Battery fumes are
flammable and/or explosive and if
ignited will result in severe bodily
injury or death.
Do not ride on tow bar between the
machine and the towing vehicle.
Falling from a moving vehicle may
cause serious injury or death.
Do not side load booms. Using
booms in this manner may cause
the machine to derail, which will
cause severe bodily injury or death.
Always extend BOTH cuttings arms
while in superelevated areas.
Failure to do so may cause the
machine to derail, which will cause
severe bodily injury or death.
Do not operate machine within 800
feet of people, livestock, buildings,
cars, etc.
MACHINE SAFETY
ALERTS
WARNING ALERTS
Failure to engage all lockup devices
before propelling at travel speed
can result in injury to personnel
and/or extensive damage to the
machine.
Remove hoses/fittings only when
system is not pressurized. High
pressure leaks can cause personal
injury. If equipped with
accumulator, isolate using ball
valve.
Always turn off machine when
performing maintenance, making
adjustments, or whenever
unintended movement of machine
could occur; unless directed
otherwise. Failure to comply could
result in personal injury and/or
damage to the machine.
Exhaust emissions caused by the
use of the engine on this machine
may cause cancer, birth defects, or
other reproductive harm if inhaled.
Disconnect the battery before
servicing this machine. Failure to
do so could result in personal injury
from accidental engine startup.
Always wear heavy gloves when
performing maintenance on the
cutter workhead. Failure to do so
may result in severe personal
injury.
Summary of Contents for Trailblazer BC60
Page 2: ......
Page 48: ...BC 60 Trailblazer Brushcutter MAINTENANCE AUGUST 2012 49458202 8203 Section 3 3...
Page 49: ...MAINTENANCE BC 60 Trailblazer Brushcutter Section 3 4 AUGUST 2012 49458202 8203...
Page 64: ...BC 60 Trailblazer Brushcutter MAINTENANCE MARCH 2011 49458201 Section 3 21 TORQUE REQUIREMENTS...
