nord NORDAC START Series, User Manual

Page: 64 / 120

NORDAC START (SK 135E / SK 175E) – Users Manual for Motor Starters
64 BU 0135 en-4118
4.2.2.1 Parametrisation
The use of a control and parametrisation unit (SK CSX-3H / SK PAR-3H) or the NORDCON software
is required to adapt the parameters. The most important parameters are shown in the following,
depending on the setting of parameter
P130 :
Parameter group Parameter numbers Functions Comments
Basic parameters P102 … P103 Start-up and shut-down time Factory setting:
Value of potentiometer
P4
P108 Switch-off mode Factory setting:
Value of DIP switch
S1-
DIP3/4
P130 Parameter source
P130 =0

Potentiometer/
Switch
P130 =1

Flash memory
P130=0 (Factory setting):
Potentiometers
(P1-P4)
and
DIP switch (S1) effective
P130=1:
Parameter settings effective
Motor data P203 Rated motor current Factory setting:
Value of
P1
P210 Start voltage Factory setting:
Value of potentiometer
P3
Control terminals P420, P434 Digital inputs and outputs Factory setting:
See description of
parameter(s)
Additional
parameters P570 Locking time Factory setting:
Value of potentiometer
P2
Table 10: Parameters and functions depending on P130