nord NORDAC START Series, User Manual

Page: 82 / 120

NORDAC START (SK 135E / SK 175E) – Users Manual for Motor Starters
82 BU 0135 en-4118
5.2 Description of parameters
P000
(parameter number)
Operating display
(parameter name)
xx 1) S P
Setting range
(or display range)
Display of typical display format (e.g. (bin =
binary)) of possible setting range and number
of decimal places
Other applicable
parameter(s):
List of other parameters that
are directly associated
Arrays [-01]
If parameters have a substructure in several arrays, this is shown here.
Factory setting { 0 } Default setting that the parameters typically have in the as-delivered condition of the device or to
which it is set after carrying out "Restore factory settings" (see parameter P523).
Scope of Application
List of device variants to which this parameter applies. If the parameter is generally valid, i.e. for the entire
model series, this line is omitted.
Description
Description, functionality, meaning and the like for this parameter.
Note
Additional notes about this parameter
Setting values
(and display values)
List of possible settings with description of the respective functions
1) xx = other identification
Figure 13: Explanation of parameter description
Information
Description of parameters
Unused lines of information are not listed.
Note / Explanation:
Code Designation Meaning
S
Supervisor-Parameter The parameter can now be displayed and modified if the
relevant supervisor code has been set (see parameter
P003 ).
P Parameter set-dependent The parameter provides different setting options that are
dependent upon the selected parameter set.
RD READ Parameter can only be read.
RM RAM The parameter can be modified but not stored in the Flash
memory.
RF READ/FLASH According to the setting of parameter P130 , the parameter
can either only be read or can be changed and saved in the
flash memory.
FL FLASH The parameter is read out of the flash memory and can be
changed.