nord NORDAC START Series, User Manual

Page: 12 / 120

NORDAC START (SK 135E / SK 175E) – Users Manual for Motor Starters
12 BU 0135 en-4118
1.2 Delivery
Check the equipment immediately after delivery / unpacking for transport damage such as
deformation or loose parts.
If there is any damage, contact the carrier immediately and carry out a thorough assessment.
Important! This also applies even if the packaging is undamaged.
1.3 Scope of delivery
NOTICE
Defect in the device
Use of unapproved accessories and options (e.g. options from other device series (SK CSX-0)) may result in
defects of the interconnected components.
Only use options and accessories which are explicitly intended for use with this device and are stated accordingly
in this manual.
Standard version :
• IP55 version of device (optionally IP66, IP69K)
• Operating instructions as PDF file on CD ROM including NORD CON, (PC
parametrisation software)
Available accessories:
Designation Example Description
C
on
tr
ol
a
nd
p
ar
am
et
ris
at
io
n o
pt
io
ns
Parametrisation units for
temporary connection to the
device, handheld
Plus connection extension
SK TIE4-RS485-RS232 (Material number
275274603)
For commissioning, parametrisation and control
of the device.
Model SK PAR-3H, SK CSX-3H
(

Paragraph 3.1 "Control and parametrisation
options ")
NORD CON
MS Windows ® - based
software
For commissioning, parametrisation and control
of the device.
Refer to
www.nord.com
NORD CON
(Free download)
IO
ext
en
si
on
Internal signal converter
Customer unit for installation in the device for
converting bipolar analogue signals to unipolar
analogue signals, e.g. digital signals on relays
Model SK CU4-REL - …

Section 3.2.1 "Internal customer interfaces
SK CU4-… (installation of modules)"