nord NORDAC START Series, User Manual

Page: 88 / 120

NORDAC START (SK 135E / SK 175E) – Users Manual for Motor Starters
88 BU 0135 en-4118
5.2.4 Control terminals
P400 Function Analogue input RD
Display range
0 … 6
Other applicable parameter(s): P102, P103, P130, P203, P210, P570
Arrays [-01] = Function Analogue input 1
(= value for P203 from potentiometer P1)
[-02] = Function Analogue input 2
(= value for P570 from potentiometer P2)
[-03] = Function Analogue input 3
(= value for P210 from potentiometer P3)
[-04] = Function Analogue input 4
(= value for P102 / 103 from potentiometer P4)
Description Representation of function of respective potentiometer P1 … P4 , for as long as the
relevant potentiometer is active.
Note If P130 =1 is set, all potentiometers are inactive. "0" = "No function" is displayed in all
arrays.
Display values
Value Meaning
0 No function
The potentiometer is not used.
1 Rated motor current
The potentiometer supplies the value for
P203
2 Locking time
The potentiometer supplies the value for P570
3 Starting torque
The potentiometer supplies the value for P210
4 Ramp times The potentiometer supplies the value for P102 / P103
5 … reserved