NorAM 65E Turbo, Service Manual

Page: 320 / 613

65E Turbo Motor Grader
Service Manual
Service 1.00_2006.03
Section 4
Front Axle
4-3
T
ROUBLESHOOTING
Before starting the machine or its attachment for troubleshooting, check, adjust and lock the operator's seat.
Ensure that no one is within the operating range of the machine. Sound the horn. Lower the attachment
slowly. DO NOT USE float position to lower hydraulic equipment.
When working on raised implements, make sure lock pin is installed, and that implement is resting on lock
pin. When changing out implements, use adequate lifting, blocking, and/or jack stands to securely support
the implement.
Move with extreme care when working under the machine, its attachments, and even on or near them.
Always wear protective safety equipment as required, such as hard hat, goggles, and safety shoes.
Know your jacking equipment and its capacity. Jacking points should be appropriate for the load applied. Be
sure support area of jack at the machine and on the ground is appropriate and stable.
Be sure chains and cables are firmly fastened and that anchor points are strong enough to withstand
expected load. Do not stay near anchor points, cables or chains.
Before opening the hydraulic system, clean the area thoroughly to prevent contaminating the system.
Relieve all pressure from the system.