13
4.3 Wing Sensor Installation
1.
Assemble the Breakaway Sensor Mounting Brackets as show in
Figure 4
and
Figure 5
.
Figure 4 – Breakaway Sensor Bracket Exploded View
Figure 5 – Breakaway Sensor Mounting Bracket Assembly
To assemble the breakaway sensor bracket:
a)
Assemble the bolt and nut into the collar of the bracket.
b)
Grease the bottom edge of the collar and the angled tube of the base.
c)
Place the collar onto the angled tube of the mounting base.
d)
Compress and install the spring between the collar and the upper ring of the
base.
Summary of Contents for UC4 Total Control
