manualshive.com logo in svg

Nonin RespSense II LS1R, Operator'S Manual, Page: 55 / 64

Share
Download
Nonin RespSense II LS1R Operator'S Manual Download Page 55

49

Accessories

 Accessories

RespSense II is designed to be used with Nonin-recommended accessories only. Use of other 
brands will compromise the function and performance. For more information about Nonin parts 
and accessories:

•

Contact your distributor or Nonin at (800) 356-8874 (USA and Canada), +1 (763) 533-
9968, or +31 (0)13 - 79 99 040 (Europe)

•

Visit www.nonin.com

Nonin may update the accessories list at any time. It is the purchaser’s responsibility to always 
ask for the current list, by model number, when ordering accessories.

Item

Description

Power Supply

Approximately 100 – 240 VAC, 50 – 60 Hz 

PSG DAC

Digital-to-analog USB cable that connects the monitor to a polysomnograph 
to record data. Several versions are available; contact Nonin or your 
distributor for more information.

Capno RTC (Real 
Time Cable)

Digital USB cable that transmits real-time data from the monitor to another 
device (e.g., computer). Requires USB driver and USB port with 2.0 or 
greater.

USB Flash Drive

SanDisk Cruzer Glide™ 8 GB USB flash drive (SanDisk P/N SDCZ60-008G-
A46) 

Capno Report 
Converter

Patient data management software for LifeSense II and RespSense II. 

Monitor Mounting 
Bracket

Connector that enables adjustable mounting and hospital standard mounting. 
Delivered with 3 screws for connecting to the back of the monitor.

Adjustable Mounting 
Clamp

Allows mounting on poles. Fits on poles up to 50 mm (2.0 in.) in diameter. 

Carrying Case

Protective carrying case in which the monitor can be fully connected without 
removing the bag.

Nasal CO

2

 Cannula

Single-use, disposable, cannula with a male Luer lock connector.
Adult (Salter Labs

®

 Ref. 4000)

Pediatric (Salter Ref. 4100)
Infant (Salter Ref. 4200)

Oxygen Delivery CO

2

 

Nasal Cannula

Single-use, disposable O

2

 delivery nasal cannula with male Luer lock 

connector. 
Adult (Salter Ref. 4707) 
Pediatric (Salter Ref. 4703)
Infant (Salter Ref. 4700)

CO

2

 Sample Line

Single-use, disposable, straight sample line with male Luer lock connectors 
on both ends (Salter Ref. 4507).

Straight T-Connector

Single-use, disposable gas adapter, 15 and 22 mm connector ends.

Nafion Tubing

Single-use, disposable Perma Pure Nafion tubing to remove water vapor 
from the sample line.

Summary of Contents for RespSense II LS1R

































































Reviews:

No comments