Nonin RespSense II LS1R, Operator'S Manual, Page: 31 / 64

25
Using the RespSense II Monitor
Language/Units Screen
This screen allows the operator to change the display language and the EtCO
2
unit of
measurement.
This screen is accessed through the Configuration Menu (see Access the Configuration Menu ).
Defaults are English and mmHg. The available languages are:
Set Language and/or Units of Measurement
NOTE: When the Units of Measurement are changed, the Responsible Organization Settings
revert to the factory defaults.
1. On the Configuration Menu, press Language/Units . Language/Units screen (figure 8)
displays.
2. Press desired language. A check mark displays to the left of the selection.
3. Press desired units of measure. A check mark displays to the left of the selection.
4. When finished, press
Save to save the changes, close the screen, and return to the
Configuration Menu. To exit without saving changes, press Cancel .
Figure 8. Language/Units Screen
Dansk (Danish)
Deutsch (German)
Ελληνικά (Greek)
Español (Spanish)
Français (French)
Italiano (Italian)
English (default)
Nederlands (Dutch)
Polski (Polish)
Português (Portuguese)
Русский (Russian)
Svenska (Swedish)
Türkçe (Turkish)