20
Using the RespSense II Monitor
Using the RespSense II Monitor
Before use, ensure the battery is fully charged by viewing the battery indicator on the display.
Start-up Sequence
Each time the monitor is turned on, it performs a
brief start-up sequence.
1. Press and hold
On/Standby
until the LCD
lights up and displays “Please Wait....”
2. An audible beep sounds.
3. The Loading screen displays.
NOTE:
A green screen may briefly display while
screens transition.
4. The Nonin logo start-up screen (figure 5)
displays with the monitor name. The lower left
corner of the screen shows the monitor’s
software revision.
Verify each of the above items occur on
initialization. If any do not occur, contact Nonin
Technical Service for assistance.
If the clock is not set, the message “System Time is Not Set” displays above the software revision.
If the warning “Settings File CRC Error, Restoring Factory Default Settings” pop-up displays, all
settings but the clock revert back to the factory defaults.
NOTE:
The Responsible Organization Settings screen is accessed through the start-up
screen. See the
Responsible Organization Settings Screen
section for more information.
CAUTION:
To ensure the longevity and safety of the monitor, the carrying case must
be used when operating the monitor in an emergency medical services (EMS)
environment.
CAUTION:
To prevent damage to the monitor, operate and store the monitor in an
upright position.
!
!
Figure 5. Start-up Screen