30
Using the RespSense II Monitor
Alarm Lock Mode Screen
This screen allows the operator to set and lock the monitor’s alarm limits.
NOTES:
•
The locked alarm limits cannot be set to limits outside of the Responsible Organization
limits.
•
When alarm limits are locked, limits cannot be adjusted when monitoring.
This screen is accessed through the Configuration Menu (see
1. On the Configuration Menu, press
Alarm Lock Mode
. Alarm Lock Mode screen (figure 11)
displays.
2. To lock the alarm limits, press
On
. A check mark displays to the left of the selection.
3. Use each parameter’s up/down arrows to adjust the high and low alarm limits.
4. When finished, press
Save
to save the changes, close the screen, and return to the
Configuration Menu. To exit without saving changes, press
Cancel
.
Figure 11. Alarm Lock Mode Screen