![Nokia 9300i User Manual Download Page 107](http://html.mh-extra.com/html/nokia/9300i/9300i_user-manual_253843107.webp)
When you activate Bluetooth for the first time, you are
asked to give a name to your device.
Bluetooth settings
To modify the Bluetooth settings, select
Desk
>
Tools
>
Control panel
, and select
Connections
>
Bluetooth
. Select
the
Settings
page.
Define the following:
•
Bluetooth active
— Select
Yes
to enable Bluetooth. If
you select
No
, all active Bluetooth connections are
ended, and Bluetooth cannot be used for sending or
receiving data.
•
My telephone's visibility
— Select
Shown to all
if you
want your device to be found by other Bluetooth
devices. If you select
Hidden
, your device cannot be
found by other devices.
•
My Bluetooth name
— Define a name for your device.
The maximum length of the name is 247 characters.
•
Remote SIM access
— Select
Enabled
to allow
communication between a compatible car kit and your
Nokia 9300i. See "SIM access profile," p. 81.
If you have set Bluetooth as active and changed your
visibility to
Shown to all
, your device and its name can be
seen by other Bluetooth device users.
Tip: To activate or deactivate Bluetooth, press Chr
+
.
Bluetooth is turned off if you select the
Offline
profile or
switch off the cover phone.
Sending data with Bluetooth
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
There can be only one active Bluetooth connection at a
time.
1. Open an application where the item you want to send
is stored. For example, to send a photo to another
device, open the
Images
application.
2. Select the item you want to send, press Menu, and
select
File
>
Send
>
Via Bluetooth
.
3. If you have searched for Bluetooth devices earlier, a
list of the devices that were found previously is shown
first. You can see a device icon and the device name.
To start a new search, press
Search again
. To interrupt
the search, press
Stop
.
4. Select the device you want to connect with, and press
Select
.
5. If the other device requires pairing before data can be
transmitted, you are asked to enter a passcode. Create
your own passcode (1-16 characters long, numeric),
and agree with the owner of the other Bluetooth
device to use the same code. The passcode is used only
once, and you do not have to memorize it. Devices that
do not have a user interface have a preset passcode.
After pairing, the device is saved to the
Paired
devices
page.
6. When the connection has been established
successfully, the note
Sending...
is shown.
107
Co
nn
ectivity
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:///C:/USERS/MODEServer/zmao/3934007/ra-8_minime/en/issue_1/ra-8_minime_en_1.xml
Page 107
Sep 27, 2005 12:15:21 PM
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:///C:/USERS/MODEServer/zmao/3934007/ra-8_minime/en/issue_1/ra-8_minime_en_1.xml
Page 107
Sep 27, 2005 12:15:21 PM