Nogueira FTN-1900, Instruction Manual

Page: 228 / 280

88
Instructions Manual
5. Operation
F
E
G
7.
Fit the inverter tool (G) to the gearbox
shaft end;
8.
Using your hands, turn the inverter tool in
the direction shown in the illustration. The
feeding rollers will rotate in the opposite
direction to the working direction,
expelling (throwing out) accumulated
material into the platform. Rotate until
all material is removed;
9.
After the “unclogging”, remove the
inverter tool (G) and store it;
10.
Lower the protective cover (F);
11.
Fit the bolt, the two flat washers and the
nut (E).