Nogueira FTN-1900, Instruction Manual

Page: 173 / 280

Instructions Manual
33
4. Preparation
ENGLISH
1.
Screw the brackets (A) and (B) to the
central aligner (C), using the bolt, washer
and nut (D);
2.
Secure the 2 pins (E) to the brackets (A)
and (B), using the bolt, washer and nut (F);
D
= Hex bolt M8 x 45 mm (01 pc)
D = Flat Washer M8 (01 pc)
D
= Lock Nut M8 (01pc)
B
A
C
D
G G
A
E
E
F
B
C
3.
Fit the central aligner (C) on the head
(figure beside) and fix it with the two
bolts (G);
4.
Place the side aligners (H) E (J). Note
F
= Hex bolt M8 x 45 mm (02 pcs)
F = Flat Washer M8 (02 pcs)
F
= Lock Nut M8 (02 pcs)
G
= Hex bolt M8 x 30 mm (02 pcs)
The pins (E) are identical and have the right
mounting side. Observe the positioning
of the holes for correct mounting on the
supports (A) and (B);