Nogueira FTN-1900, Instruction Manual

Page: 227 / 280

Instructions Manual
87
5. Operation
ENGLISH
5.10- Clearing (unclogging)
In case of 'clogging' the harvester, unclog the
feeding rollers using the inverter tool supplied
with the machine (figure on the side).
'UNCLOGGING' PROCEDURE:
1.
Immediately stop the tractor and
disconnect the power take-off;
2.
Remove the key from the ignition;
3.
Check that the safety pin of the machine
has broken. If it is broken, replace it with
a new one. To change the safety pin, see
item 6.10 “SAFETY PINS”.
4.
Take the inverter tool (G) and the handle
(H) from the tool box that comes with
the machine;
5.
Remove bolt (E) from protective cover;
6.
Lift the protective cover (F);
INVERTER TOOL
G
H
Keep the inverter tool always with the
machine, so it will be available whenever
necessary.
ATTENTION!
DANGER!
In the event of a 'clogging', immediately
turn off the tractor and remove the key
from the ignition.
NEVER TRY TO UNBLOCK THE MACHINE
WITH THE TRACTOR ON! RISK OF SERIOUS
ACCIDENT!