Nogueira EXPRESS-5040, Instruction Manual

Page: 19 / 176

Instructions Manual
19
For a safe and efficient operation, a tractor must be used with power from 35
hp onwards in the power socket, at 540 rpm.
CONNECTION TO THE TRACTOR
With the machine and the tractor parked on level ground, position the tractor in
a way that its traction bar fits into the coupling of the baler.
TRACTOR REQUIRED
A
B
Use the jack to adjust the
height of coupling.
After the connection,
return the jack to the
rest position.
Place the coupling
pin A and the cot-
ter pin B.
This equipment was planned to operate with 540 rpm in the
power socket. It must not be used on tractors with a rotation
differing from the one indicated.
C
After the connection ensure that the pin A is well
locked. Never operate or transport the machine without
placing the cotter pin B.
fig. 6
fig. 7 fig. 8 fig. 9
ATTENTION
If required, so that the baler works as level as possible, the height of the coupling
can be increased, removing the two sets screws C and lowering the coupling to
a lower hole.
ATTENTION