Nodka TPC6000-6151, User Manual

Page: 79 / 96

TPC6000 ‐ 6151 User Manual
79
4.1 System Maintenance Introduction
If the components of the TPC6000 ‐ 6151 fail they must be replaced, such as the wireless LAN
module or the motherboard. Please contact the system reseller or vendor to purchase the
replacement parts. Back cover removal instructions and jumper settings for the
TPC6000 ‐ 6151 are described below.
4.2 Motherboard Replacement
In the case of motherboard failure, please contact an IEI sales representative, reseller or
system vendor. The motherboard is accessible after opening the rear cover.
4.3 Cover Removal
Warning:
Turn off the power before removing the back cover . Risk of electrocution. Severe damage
to the product and injury to the body may occur if internal parts are touched while the
power is still on.
Warning:
Take antistatic precautions when working on the internal components. Some internal
components are easily damaged or destroyed by electrostatic discharge. Take antistatic
precautions to prevent electrostatic discharge.
To replace any of the following components,

Memory module

Wireless LAN module

Inverter
The back cover of the TPC6000 ‐ 6151 must be removed. To remove the back cover, loosen
the four silver screws, slide the cover down and then lift to remove.