Nodka TPC6000-6151, User Manual

Page: 28 / 96

TPC6000 ‐ 6151 User Manual
28
Figure 2 ‐ 16: VGA connection
Step 4: Secure the VGA connector. Secure the DB ‐ 15 VGA connector from the VGA monitor
to the external interface by tightening the two retention screws on either side of
the connector.
2.8 Power connector
The power cable connects the panel PC to power supply. The power cable is required for
operation of the panel PC.
Step 1: Connect one end to the panel PC.
Step 2: Connect the other end to the included power supply.
2.9 Connectors Definition

COM port
COM1~4 are DB9 connector and its definition is:
PIN
SIGNAL
RS ‐ 232 RS ‐ 485
1 DCD Data ‐
2 RXD Data+
3 TXD N/A
4 DTR N/A
5 GND GND
6 DSR N/A