Click on this radio button to enable the following three fields for manually
setting the TCP/IP information for your device.
IP Address
Enter a static IP address in this field. It defines the IP address of the terminal,
which uniquely identifies it on a TCP/IP network
Subnet Mask
Enter the subnet mask of the IP address. This determines which part of the
address denotes the network.
Gateway
Enter in the IP address of the Gateway. If a host session address is outside of
the Subnet of the terminal, the Gateway address defines which gateway is used
to reach the host.
Client IP Address
Click on the
Client IP Address
check button to know the Client information, including
Client name, IP address, subnet mask, gateway, DHCP server, DNS and WINS.
Ping IP Address
Click on the
Ping IP Address
to display the Network State dialog box. You can ping the
name or IP of a host connected on the network. You even can ping an web site through
the gateway.
You can setup h ow many times you want to ping for a ping task. Default is 6 times. And
you can setup the timeout value of host response for different network configuration. The
default is 2 seconds.
Summary of Contents for MinIT6000
Page 1: ...MinIT6000 User s Manual...
Page 16: ...EULA End User License Agreement Please read the license agreement carefully IP Address...
Page 18: ...Note The default in all fields is unselected Display Settings Printer Setup...
Page 20: ...Select the Manufacturer and Model number of your printer Printer Name Set Printer Default...
