Nitto TGF450 Series, User Manual

Page: 25 / 47

User’s Manual
Rev1.0
Date:15/07/2015 User’s Manual
25 / 47
Chart 5.2 Digits settingaddress
Code
setting
address
Item Code Description of code
D001 Max flow rate [-99999
，
999999] Unit is same as flow rate,Max/min flow rate
of 4~20mA and 200~1000Hz output
D002 Min flow rate
[-99999
，
999999]
D003
Max frequency
output
0.5~10000
The frequency output of max flow, unit is
Hz
D004
Min frequency
output
0.5~10000
The frequency output of min flow, unit is
Hz
D005 Cut off small signal [-99999
，
999999]
Unit is same as flow rate
D008 K factor 0~999999
D009 Density 0~999999 Unit is Kg/m³
D010 Pipe size 0~9999999 Unit is mm
D011
Max temperature
(Unit as set in C14
）
-99999~999999
The max frequency when temperature is
output by frequency, 1000Hz for instance.
The max current when temperature is
output by current, 20mA for instance.
D012
Min temperature
(Unit as set in C14
）
-99999~999999
The min frequency when temperature is
output by frequency, 200Hz for instance.
The min current when temperature is output
by current, 4mA for instance.
D013
Max pressure (Unit
as set in C13
）
-99999~999999
The max frequency when temperature is
output by frequency, 1000Hz for instance.
The max current when temperature is
output by current, 20mA for instance.
D014
Min pressure (Unit
as set in C13
）
-99999~999999
The min frequency when temperature is
output by frequency, 200Hz for instance.
The min current when temperature is output
by current, 4mA for instance.
D015 Ambiant pressure 0~999999 Unit according to setting
D017
Equivalent of pulse
output
0~999999
Set the equivalent that one pulse output
stands for.Unit as C06
D018
Length of rectangle
pipeline
0~999999 Unit is mm
D019
Width of rectangle
pipeline
0~999999 Unit is mm
D030
Temperature of
standard condition
0~20
Default temperature of standard condition is
20 degree C
D033 Reference flow rate 0~999999
When measured flow rate is over calibrated
max flow, will display/output the reference
flow rate
Note:
1) When setting the max or min of pressure, please take consideration of gauge pressure or absolute
pressure, if the pressure sensor is outputting gauge pressure, please set D015 the ambient pressure to
get correct pressure reading.