User’s Manual
Rev1.0
Date:15/07/2015 User’s Manual
21
/
47
Picture 5.3 Picture Enter or quit digital setting
When in digital setting, the first row will display the reference number of the digital setting, and
the lower row will display the contents of this parameter. The digit that is flashing is the digit under
setting. Please reference to picture 5.4., which means D001=1.60000, Max flow is 1.6 (unit according
to other setting.)
Picture 5.4 digital setting
When under digital setting,, user can use “L-R button” to choose which digit on the displayer are
to be set , and use “R-D button” to switch the digit to 0~9. The first time of pressing “Enter button”
means to set the lower row, when under this situation, users can still use “L-R button” or “U-D
button” to set. Press “Enter button” again to check if the setting is available. If setting is available, the
display will not flash, when user can still press “L-R button” or “U-D button” to set again. When
display is not flashing, pressure “Enter button” to save and go to next setting.
If want to quit code setting, same as entering, please hold “Enter button” then press “U-D button”
at the same time.
