SR Troubleshooting
8
.
The Width
of
Backing
aper and that of the Ribbon
3. When the Platen Roller Has a Scratch
4
P
Pull the locking levers on both
sides of the platen roller toward
you and remove the platen roller
Wipe the platen roller with alcohol. When it has a scratch, replace it
with a new one.
(A scratch or a hollow on the platen roller causes the blurred print at the
point on the label that runs over the scratch or the hollow. The platen
roller is a consumable component.)
The width of the ink ribbon should be
wider than that of the backing paper of
the labels by 5mm on both sides (See
ased ribbon may
figure on the right).
When the ribbon is as wide as, or much
wider than, the backing paper, a
blurred print or cre
occur.
