SR Troubleshooting
1. How to Adjust the Density
1.1. How to Clean the Thermal Head
1.2. How to Adjust the Density
Rem
n
Stuck on the Labels
edies for the Ink Ribbo
10
Control
Panel
Printer
Turn the power off.
→
Open the
cover.
→
Remove the ink ribbon.
Clean the thermal head,
especially the brown part at the
center (See the figure on the
right.).
(Use the cleaning cloth
or alcohol.)
Set the ink ribbon, then set the density
switch to 0 and print labels.
If labels are printed lightly,
turn the density
switch to the upper number gradually
and
stop where you can get the best density.
If highly colored labels are printed with the
density switch set to 0, the setting of function
No. 10 (Supply Type) may not be suitable.
