SR Troubleshooting
Remedies for Head Error
1. Thermal Head Breakdown
SR
Control Panel
Turn off the power.
→
Open the cover.
Replace the thermal head with a new one and print labels.
If the thermal head is broken, the replacement will solve the
problem.
(See “How to Replace the Thermal Head”.)
If you do not have a spare thermal head and want
to continue printing labels even if the print
quality is deteriorated, follow the procedure
below. Head error is temporarily ignored. (
Be
aware that the broken wiring in the thermal
head causes white vertical lines.
）
Turn on the power while pressing [Mode
／
Reset]
and [
↓
／
Set TOF] at the same time. Press and
hold the two switches until the buzzer beeps.
You can print labels until you turn off the power.
18