SR Troubleshooting
Wipe carefully the surrounding part of the light-receiving part (Fig.3).
Pass the cleaning cloth through the region where the labels pass and, lifting up
the cloth slightly, move it back and forth several times (You can clean the form
edge sensor without removing the center sensor.).
Mount the center sensor and tighten the two slotted head screws.
Set the labels and the ink ribbon and then set the threshold value,
following the steps in 1.1.
Form Edge Sensor (movable)
light-receiving
part
Fig.3
Fig.4
form edge
sensor (movable)
Clean the form edge sensor (movable),
Reassemble the sensor.
4
