10
Service Manual – SC500
03 - General Information
−
This machine is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the machine by a
person responsible for they safety.
−
Children should be supervised to ensure that they do not play with the machine.
−
Close attention is necessary when used near children. Use only as shown in this
Manual. Use only Nilfisk or Advance recommended accessories.
−
Check the machine carefully before each use, always check that all the components
have been properly assembled before use. If the machine is not perfectly assembled it
can cause damages to people and properties.
−
Take all necessary precautions to prevent hair, jewels and loose clothes from being
caught by the machine moving parts.
−
Do not use the machine on incline.
−
Do not tilt the machine more than the angle indicated on the machine itself, in order to
prevent instability.
−
Do not use the machine in particularly dusty areas.
−
Use the machine only where a proper lighting is provided.
−
While using this machine, take care not to cause damage to people or objects.
−
Do not bump into shelves or scaffoldings, especially where there is a risk of falling
objects.
−
Do not lean liquid containers on the machine, use the relevant can holder.
−
The machine operating temperature must be between 32°F and 104°F (0°C and +40°C).
−
The machine storage temperature must be between 32°F and 104°F (0°C and +40°C).
−
The humidity must be between 30% and 95%.
−
When using floor cleaning detergents, follow the instructions on the labels of the
detergent bottles.
−
To handle floor cleaning detergents, wear suitable gloves and protections.
−
Do not use the machine as a means of transport.
−
Do not allow the brush/pad to operate while the machine is stationary to avoid
damaging the floor.
−
In case of fire, use a powder fire extinguisher, not a water one.
−
Do not tamper with the machine safety guards and follow the ordinary maintenance
instructions scrupulously.
−
Do not allow any object to enter into the openings. Do not use the machine if the
openings are clogged. Always keep the openings free from dust, hairs and any other
foreign material which could reduce the air flow.
−
Do not remove or modify the plates affixed to the machine.
−
When the machine is to be pushed for service reasons (missing or discharged
batteries, etc.), the speed must not exceed 2.5 mi/h (4 km/h).
