29
Service Manual – SW5500, FLOORTEC R 985
03 - General Information
Scheduled Maintenance Table (Diesel/LPG version)
Procedure
Upon
delivery
Every
10
hours
Every
50
hours
Every
100
hours
Every
200
hours
Every
year
Engine oil level check
(1)
Battery fluid level check
(2)
Side and main broom height check
Engine air filter check
(1)
Service brake cable adjustment
(3)
Hopper dust filter check and cleaning (“A” method)
(4)
Hopper hydraulic lifting system oil level check
(2)
Skirt height and operation check
Dust guard system water filter check and cleaning
Engine air filter cleaning
(4)
(4)
Hopper dust filter check and cleaning (“B” method)
(4)
Filter shaker operation check
Brake replacement
Engine oil change
(5) (6)
Spark plug check/cleaning
Nut and screw tightening check
(6)
Steering chain cleaning
(*)
Safety system operation check
(2)
Engine filter trap cleaning
Engine baffle plate cleaning
Fuel filter cleaning
(7)
Brake pad check/adjustment/replacement
(3)
Hopper dust filter check and cleaning (“C” method)
(4)
Hopper gasket integrity check
Lifted hopper sensor operation check/adjustment
Fuel filter cleaning (diesel)
Engine paper air filter replacement
Spark plug replacement
Engine idle speed check/adjustment
Valve clearance check/adjustment
Hydraulic system oil change
(7)
Supply hose replacement (LPG)
Engine combustion chamber cleaning
Every 500 hours
Fuel hose check/replacement (Diesel)
Every 2 years
(1) Daily or after using the machine
(2) Or before start-up
(3) Or more frequently if the machine is used on slopes
(4) Or more often in dusty areas
(5) Or every 6 months
(6)
And after the first 20 running-in hours.
(7)
Change the hydraulic system oil for the first time after 500 hours, then every 2,000 hours or every year.
