Nikon T-RCP, Instructions Manual, Page: 21 / 79

I Preparations
2 Setting Attachment Information
- 19 -
I
(5) Barrier Filter
Set the information on barrier filters attached to the barrier filter changeover (BA filter wheel).
1
Press the MODE key, and the SETTING MENU screen will
appear on the LCD.
Select “Barrier” using the
S
key or the
T
key and then
press the [ ] key.
ＳＥＴＴＩＮＧ ＭＥＮＵ
Ｏｂｊｅｃｔｉｖｅ
Ｃｏｎｄｅｎｓｅｒ
Ｆｉｌｔｅｒ
Ｅｘｃｉｔｅｒ
Ｂａｒｒｉｅｒ
Ｃｏｍｂｉｎａｔｉｏｎ（Ｏｂｊ．＞Ｃｏｎｄｅｎｓｅｒ）
Ｃｏｍｂｉｎａｔｉｏｎ（Ｆｉｌｔｅｒ＞ＥＸ／ＢＡ）
Ｍｏｒｅ
2
Select “Name” for the barrier filter using the PREV or
NEXT key.
„
Note:
The numbers at the left of the screen represent the
addresses of the barrier filter changeover.
ＢＡＲＲＩＥＲ
Ｎａｍｅ
１［ ＢＡ５１５－５５５ ］５［――――――――――］
２［――――――――――］６［――――――――――］
３［――――――――――］７［――――――――――］
４［――――――――――］８［――――――――――］
Ｅｄｉｔ
3
Move to the next address of the barrier filter changeover
using the
S key or the T key. Repeat step 2 above.
ＢＡＲＲＩＥＲ
Ｎａｍｅ
１［ＢＡ５１５－５５５ ］５［――――――――――］
２［ ――――――――――］６［――――――――――］
３［――――――――――］７［――――――――――］
４［――――――――――］８［――――――――――］
Ｅｄｉｔ
4
Press the MODE key to end the setting and to return to the
OPERATION screen.
„
Note:
If the barrier filter changeover is not connected, you cannot set the information on barrier filters.
“---------” indicates that no barrier filter is attached or registered at the address.
If a barrier filter attached is not in the presets, register it to the list of optional barrier filters. For details, see V-7 (6)
Barrier Filter in section V-7 (Registering Data for Optical Members).