Nikon T-RCP Instructions Manual Download Page 17

Page: 17 / 79

I Preparations

2 Setting Attachment Information

- 15 -

Setting Attachment Information

Start up the remote control pad and set the optical members attached to the electrical components in use.

The LCD indicates information for the set optical members.

(1) Objective

Set the information on objectives attached to the revolving nosepiece (motorized nosepiece).

Press the MODE key, and the SETTING MENU screen will
appear on the LCD.

Select “Objective” using the

key or the

key and then

press the [

] key.

ＳＥＴＴＩＮＧ　ＭＥＮＵ

Ｏｂｊｅｃｔｉｖｅ

Ｃｏｎｄｅｎｓｅｒ

Ｆｉｌｔｅｒ

Ｅｘｃｉｔｅｒ

Ｂａｒｒｉｅｒ

Ｃｏｍｂｉｎａｔｉｏｎ（Ｏｂｊ．＞Ｃｏｎｄｅｎｓｅｒ）

Ｃｏｍｂｉｎａｔｉｏｎ（Ｆｉｌｔｅｒ＞ＥＸ／ＢＡ）

Ｍｏｒｅ

Select “Series” for the objective using the PREV or NEXT
key.

Note:

The numbers at the left of the screen represent the
addresses of the revolving nosepiece.

ＯＢＪＥＣＴＩＶＥ

Ｓｅｒｉｅｓ　　　　　　Ｍａｇ．　　　　　　　　　　　Ｅｓｃ．

１［

Ｐ　Ｆｌｕｏｒ　　　］［―――――――――――――――］

[

－

]

２［――――――――――］［―――――――――――――――］

[

－

]

３［――――――――――］［―――――――――――――――］

[

－

]

４［――――――――――］［―――――――――――――――］

[

－

]

５［――――――――――］［―――――――――――――――］

[

－

]

６［――――――――――］［―――――――――――――――］

[

－

]

　Ｅｄｉｔ　　Ｔｙｐｅ　　　　　　　Ｎ．Ａ．　　Ｗ．Ｄ．

　　　　　　　Ｄｒｙ　　　　　　　　　０．１３　１７．１０

Move the cursor using the

key or the

key.

Select “Mag.” for the objective using the PREV or NEXT
key.

ＯＢＪＥＣＴＩＶＥ

Ｓｅｒｉｅｓ　　　　　　Ｍａｇ．　　　　　　　　　　　Ｅｓｃ．

１［Ｐ　Ｆｌｕｏｒ　　　］［

ＤＬ　　　　　　　　　　　４ｘ］

[

－

]

２［――――――――――］［―――――――――――――――］

[

－

]

３［――――――――――］［―――――――――――――――］

[

－

]

４［――――――――――］［―――――――――――――――］

[

－

]

５［――――――――――］［―――――――――――――――］

[

－

]

６［――――――――――］［―――――――――――――――］

[

－

]

　Ｅｄｉｔ　　Ｔｙｐｅ　　　　　　　Ｎ．Ａ．　　Ｗ．Ｄ．

　　　　　　　Ｄｒｙ　　　　　　　　　０．１３　１７．１０

(When the TE2000-E and T-ND6-E sextuple motorized
DIC nosepiece are used together)

Move the cursor using the

key or the

key.

Select “Esc.” for the objective using the PREV or NEXT
key.

* : The objective automatically lowers to the Escape

position, returning to the original position after the
objective switch is made.

- : The objective switches with no Escape/Refocus

movement.

■

Note:

Rotating past a “*” when switching from one objective
set to “-” another set to “-” will trigger an automatic
Escape.

Although “*” is set, no Escape/Refocus movement is
performed for TE2000-U and TE2000-S.

ＯＢＪＥＣＴＩＶＥ

Ｓｅｒｉｅｓ　　　　　　Ｍａｇ．　　　　　　　　　　　Ｅｓｃ．

１［Ｐ　Ｆｌｕｏｒ　　　］［ＤＬ　　　　　　　　　　　４ｘ］

[

－

]

２［――――――――――］［―――――――――――――――］

[

－

]

３［――――――――――］［―――――――――――――――］

[

－

]

４［――――――――――］［―――――――――――――――］

[

－

]

５［――――――――――］［―――――――――――――――］

[

－

]

６［――――――――――］［―――――――――――――――］

[

－

]

　Ｅｄｉｔ　　Ｔｙｐｅ　　　　　　　Ｎ．Ａ．　　Ｗ．Ｄ．

　　　　　　　Ｄｒｙ　　　　　　　　　０．１３　１７．１０

Summary of Contents for T-RCP















































































Search results

Summary of Contents for T-RCP

Reviews:

Nikon T-RCP, Instructions Manual, Page: 17 / 79

Search results

Summary of Contents for T-RCP

Reviews: