Nikon NPL-632, Instruction Manual

Page: 121 / 206

Field Station NPL-632 Instruction Manual 107
Menu Key 5
To enter P1 and P2, enter point names or take
measurements to targets.
Enter the plus-minus angle, horizontal distance, and
vertical distance from the baseline defined by P1-P2.
If you do not enter a value in the dVD field, the value
0.0000 is used.
When you press
[ENT]
in the dVD field, a new point is
calculated. The PT name defaults to the last recorded
PT + 1.
To record the new point and return to the point input
screen, press
[ENT]
.
P1 (base PT) defaults to the previously recorded PT. P2
defaults to the previous P1.
Entering coordinates
To manually enter the XYZ coordinates, press
[3]
or
select
Input XYZ
in the Input menu.
The PT name defaults to the last recorded PT + 1.
Enter the coordinates using the numeric keys. To move
to the next field, press
[ENT]
or
[v]
in a field
To store the point as an MP record and return to the
point input screen, press
[ENT]
in the Z field. The default
PT is incremented to the next value.
To continuously calculate a new point, enter +Ang, HD, and dVD from the previous bearing line. This is a
convenient way to enter Traverse points.
You can record NE, NEZ, or Z-only data to the database.