Nikon NPL-632, Instruction Manual

Page: 86 / 206

4 Applications
72 Field Station NPL-632 Instruction Manual
5. Ask the rodman to adjust the target position. When the target is on the intended
position, the displayed errors become 0.0000 m (or 0.0000 ft).
6. To record the point, press
[ENT]
. PT defaults to the
specified PT + 1000.
After recording the point, the display returns to the
observation screen. When you press
[ESC]
, the display
returns to the PT/CD/R input screen. If you entered the
stakeout point using a single point name, the PT
defaults to the last PT + 1.
If you selected a point from the list, the display returns
to the list, unless all points have been selected. Press
[ESC]
to return to the point input screen.
dHZ Difference in horizontal angle to the target
point.
R/L Right/Left (Lateral error)
IN/OUT In/Out (Longitudinal error
CUT/FIL Cut/Fill
To switch between display screens, press
[DSP]
. This function works as in the angle-distance stakeout, except
that the screen counter (for example, S-O1/8) is not displayed. For more information, see Using
[DSP]
to switch
between display screens, page 70 .
During observation, you can use the flashing Lumi-guide to indicate distance.
To set the tolerance for the Lumi-guide flash speed, press
[S-O]
in any observation screen. For more information,
see Stakeout, page 118 .
Once a measurement is taken, the Cut/Fill value and Z coordinate are updated as the VA is changed.
Use the Add Constant field in
MENU > Settings > Stakeout
to
specify an integer that is added to the point number being staked to generate
a new number for recording the staked point. The default value is 1000. For
example, when you stake out PT3 with an Add Constant of 1000, the default
number for SO record is 1003. For more information, see
Stakeout, page 118 .