Nikon NPL-632 Instruction Manual Download Page 103

Page: 103 / 206

Field Station NPL-632 Instruction Manual

Applications

Measuring angle offsets

To enter the angle offset function, press

[2]

select

Angle

in the Offset menu.

If you have not taken a distance measurement
before entering this function, a temporary
measurement screen appears.

Sight the target and then press

[MSR1]

[MSR2]

To take the angle offset, rotate the alidade and
telescope. The measured distance (HD) remains
unchanged.

To record the offset point, press

[ENT]

or the

softkey.

The XYZ data is also recalculated, based on the new angle.

Two-prism pole

To enter the two-prism pole function, press

[3]

select

2Prism Pole

in the Offset menu.

Sight the first prism and then press

[MSR1]

[MSR2]

Sight the second prism and then press

[MSR1]

[MSR2]

You can record an angle offset in the Basic Measurement Screen (BMS). After taking a distance measurement,
rotate the alidade and/or telescope. Then press

[ENT]

to record the measured distance with the updated angle

value. If you use this method, the dimension of the angle offset is not stored as a CO record. To store the CO
record, use the O/S function.

Summary of Contents for NPL-632















































































































































































































Search results

Summary of Contents for NPL-632

Reviews:

Related manuals for NPL-632

Brands by name

Popular brands

Nikon NPL-632, Instruction Manual

Search results

Summary of Contents for NPL-632

Reviews:

Related manuals for NPL-632

Brands by name

Popular brands