Nikon NPL-632, Instruction Manual

Page: 59 / 206

Field Station NPL-632 Instruction Manual 45
Getting Started 3
Entering an existing point
When you enter a known point name or number, the
coordinates of that point are displayed briefly. A short
beep sounds before the next screen appears or the next
field is selected.
Entering a new point
When you input a new point name or number, a
coordinate input screen appears. Enter the point’s
coordinates in NE, NEZ, or elevation-only (Z) format.
Press
[ENT]
on the last line (the CD field) to store the
point in the current job.
Using a point without coordinates
To use a point without recording the coordinates, press
[ENT]
in a PT field, without entering a point name.
The input coordinates are used in the calculation. They
are not saved in the database.
To adjust the duration of the coordinate window display, go to MENU >
Settings > Others
. To leave the window open until you press
[ENT]
,
set the XYZ disp field to +ENT. For more information, see page 120 .