Nikon LV-ECON, Instructions Manual

Page: 18 / 59

16
3
To Connect with the Motorized Focusing Module
To connect the product with the motorized focusing module (LV-FMA or LV-IMA), perform the
following procedure:
1
When LV-IMA is used, check that the motorized focusing module is mounted on a pedestal
or such sturdy base. When LV-FMA is used, check that the motorized focusing module is
mounted on the LV-DIA or LV-EPI.
2 Check that the power switch on this product is turned off (the “ ” side is pushed).
3 Connect the connector on the side of the motorized focus module and the LV-FMA connector
on the back of this product using the special connection cable, that is 2.8 m in length.
To avoid interference between the cable and the motorized devices, draw the cable carefully.
* To use the auto focus system LV-AF, the motorized focusing module is connected to the LV-
AF. For details, refer to p.22 “To Connect with the Auto Focus System” and the instruction
manual of the LV-AF.
C-HGFIE
USB
LV-AF TE2-PS100W TE2-PS100W
UEPI2A
100-240V
~
1.0A 50/60Hz
LV-FMA LV-DICA
NOSEPIECE
DIA EPI
D o n o t t o u c h t h e h e i g h t a d j u s t m e n t p a r t
w h e n c a r r y i n g t h i s p r o d u c t .
LV-FMA
LV-ECON
Connection cable
C-HGFIE
USB
LV-AF TE2-PS100W TE2-PS100W
UEPI2A
100-240V
~
1.0A 50/60Hz
LV-FMA LV-DICA
NOSEPIECE
DIA EPI
JAPAN
LV-IMA
LV-ECON
Connection cable
For details about assembly method of the motorized focusing module, refer to the instruction
manual for the LV-FM/LV-FMA or LV-IM/LV-IMA.
* An optional connection cable of 10 m in length is also available.
•
For LV-FMA
•
For LV-IMA