27
Operation
WARNING
•
Each motorized device will move when this product is operated. To prevent injury, do
not touch the moving device during operation. Before operating this product, check all
moving devices for your safety.
•
If you touch the elevating section or its attached devices during operation of the
motorized focusing module, it may cause injury to hands or fingers. Do not touch the
motorized devices when you operate the product.
•
When a power supply for the illuminator or an external light source is connected with
this product, you can control the lamp and shutter with operating this product. Before
operating this product, check the illuminator and its surroundings for your safety.
CAUTION
•
Software setup work for the microscope system
When the microscope is assembled or the configuration of the microscope is changed,
perform the software setup works for various settings of the microscope via a PC by
using the software, “LVSetup,” in “LV Series Support Tools” provided with this
product.
In the setup works, information for the devices and parts (objectives, filter cubes,
illuminator, and so on) is registered and interlock controls for such devices are
specified. Make sure to perform the setup works to use the microscope system
correctly.
For details about operations and setup works of “LVSetup,” see “LV Series Support
Tools software manual.”
Summary of Contents for LV-ECON
Page 1: ...LV ECON E Controller Instructions M374 E 07 1 NF 2 2 3 ...
Page 2: ......
