13
III. Device Connections
1
To Connect with the Motorized Nosepiece
To connect the product with the motorized nosepiece (LV-NU5A or LV-NU5AC), perform the
following procedure:
1
Check that the motorized nosepiece is mounted on the microscope base (the motorized
focusing module, or such) correctly.
2
Check that the power switch on this product is turned off (the “ ” side is pushed).
3
Connect the nosepiece cable line to the NOSEPIECE connector on the back of this product
using the special nosepiece connection cable, that is 2.8 m in length.
To avoid interference between the cable and the motorized devices, draw the cable carefully.
C-HGFIE
USB
LV-AF
TE2-PS100W
TE2-PS100W
UEPI2A
100-240V
~
1.0A 50/60Hz
LV-FMA
LV-DICA
NOSEPIECE
DIA
EPI
LV-ECON
LV-NU5A or LV-NU5AC
Nosepiece connection cable
* An optional nosepiece connection cable of 10 m in length is also available.
For details about assembly method of the motorized nosepiece, refer to the instruction
manual for the LV-FM/LV-FMA or LV-IM/LV-IMA.
Summary of Contents for LV-ECON
Page 1: ...LV ECON E Controller Instructions M374 E 07 1 NF 2 2 3 ...
Page 2: ......
