Nikon K Series, Instruction Manual

Page: 87 / 198

Nikon N Series/K Series Total Station Instruction Manual 69
Applications 4
Specifying the stakeout point by angle and distance
1. To display the input screen for the distance and angle to the target, press
[1]
or
select
HA-HD
in the Stakeout menu.
2. Enter the values and press
[ENT]
.
3. Rotate the instrument until the dHA is close to
0°00'00".
4. Sight the target and press
[MSR1]
or
[MSR2]
.
When the measurement is completed, the
differences between the target position and the
stakeout point are displayed.
Once a measurement is taken, the Cut/Fill value and Z coordinate are updated
as the VA is changed.
HD Horizontal distance from station point to stakeout
point
dVD Vertical distance from station point to stakeout point
HA Horizontal angle to stakeout point
If you press
[ENT]
without entering HA, the current HA is used.
dHA Difference in horizontal angle to the target point
R/L Right/Left (Lateral error)
IN/OUT In/Out (Longitudinal error)
CUT/FILL Cut/FilL
If you press
[HOT]
in any observation screen, the HOT key menu appears. You
can use this menu at any time to change HT and T-P.