Nikon JAA79551, Repair Manual

Page: 92 / 115

INC
JAA79551-R.3690.A
- Ａ 65 ･ AF-S VR 70-300/4.5-5.6G -
Reference:
After the seven measurements, find the point of the longest arrow which is situated at the most right side of the
confirmation screen. Then, by referring to the below "Adjustment location", specify the adjustment location(s)
and rotate each adjusting screw clockwise.
Adjustment locations:
If the arrow point of the 1st or 2nd quadrant is at the most right side, rotate the adjusting screw that can be
seen through "A" hole of "Fig.2".
If the arrow point of the 3rd quadrant is at the most right side, rotate the adjusting screw that can be seen
through "B" hole of "Fig.2".
If the arrow point of the 4th quadrant is at the most right side, rotate the adjusting screw that can be seen
through "C" hole of "Fig.2".
(e.g. In "Image 4", the arrow point of the 1st quadrant is at the most right side, so rotate the adjusting screw
that can be seen through "A" hole of "Fig.2".)
Image 4.
Fig.2
1st quadrant
2nd quadrant
3rd quadrant
4th quadrant
Viewed from lens
backward
A
B
C
Index position
After the adjustment, apply the screw lock to the screw that can be seen through the hole of "Fig.2", and apply
[C-8008B] to the other two screws. Then after this application, let stand for five minutes.
Caution 1: If the adjusting screw is turned through approx. every 45° clockwise and if the arrow becomes
longer than the others, do NOT turn any more. In this case, put the hexagonal wrench into other
adjusting-holes to make an adjustment.
Caution 2: Do NOT turn the adjusting screw counterclockwise.