JAA80151-R.3718.A
- Ａ ・AF-S 4-24/2.8G -
G1 lens
R2 surface
G1 lens unit
#76
Adjustment washer for curvatube of field
★
J11344
By using [J11344], mount the G1 lens unit and put the washer (#76).
�
For G1R2 surface (back side), nano crystal coat (hereinafter called "Nano coat"
）
is used.
"Nano coat" is so soft that it is easily damaged by wiping with a lens cleaning paper.
Therefore, treat with enough caution so that dust/dirt, etc, is NOT adhered on the "nano
coat" surface when disassembling.
If dust/dirt is adhered on the G1R2 surface, blow away as much dust/dirt by a blower as
possible.
If dust/dirt cannot be removed by a blower, dip a small amount of methanol in CK wiper
(CK), and wipe the surface softly with it. Do NOT use the CK wiper for cleaning the G1R2
surface again, if it has been used even once.
Apply screw lock (1mm×10mm)
on the middle of screw thread.
Adhesive: Screw lock
INC
