Nidek Medical ARK-1S, Operator'S Manual

Page: 19 / 112

13
INTRODUCTION: Configuration and Functions
2.2.2 AR/KM measurement screen description
The screen for AR (refractive error) and KM (corneal curvature radius) measurements is comprised of
three pages.
The pages differ only in the function icons displayed to the right of each screen.
1
Patient’s eye (R/L)
2
Function icons
The functions assigned to the function buttons on the right and left sides of the screen are displayed
as icons.
ᵏ
㹐㸸㸱ࠉ㸦㸷㸧ࠉ㹉㸸㸱 㹐㸸㸱ࠉ㸦㸷㸧ࠉ㹉㸸㸱
㹑㸫ࠉ㸯 㹑㸫ࠉ㸯㸬㸰㸳ࠉ㹐㸯ࠉࠉ㸵㸬㸷㸶ࠉ㸯㸵㸱ࠉ㹎㹑ࠉ㸶㸬㸮 㸰㸳ࠉ㹐㸯ࠉࠉ㸵㸬㸷㸶ࠉ㸯㸵㸱ࠉ㹎㹑ࠉ㸶㸬㸮
㹁㸫ࠉ㸮 㹁㸫ࠉ㸮㸬㸵㸳ࠉ㹐㸰ࠉࠉ㸵㸬㸳㸷ࠉࠉ㸶㸱ࠉ㹁㹑㸯㸱㸬㸳 㸵㸳ࠉ㹐㸰ࠉࠉ㸵㸬㸳㸷ࠉࠉ㸶㸱ࠉ㹁㹑㸯㸱㸬㸳
㸿ࠉࠉࠉࠉࠉ㸰ࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉ㹎㹂ࠉࠉ㸴㸰 㸿ࠉࠉࠉࠉࠉ㸰ࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉ㹎㹂ࠉࠉ㸴㸰
µ
´
¸ ¶ ·
±°
²
±±
±² ±³
±
²
³
¹
R/K Selects measurement mode (AR/KM, AR, or KM).
Auto Selects auto tracking mode (3D, 2D, OFF) and auto shot mode (ON, OFF).
Clear Holding down the button for about a second erases all the measured data.
Print
Pressing the button while the memory indicator is lit prints the measured results.
Pressing the button while the memory indicator is not lit advances printer paper.
VA
Displays the corrected visual acuity measurement screen (SUBJECT).
Holding down the button for about a second displays the uncorrected visual
acuity measurement screen (VA TEST).
Accommodation
measurement
Displays the accommodation measurement screen (ACCOMMODATION).
Ring image / retroil-
lumination
Displays the ring image in full screen when a thumbnail of the ring image is dis-
played.
Holding down the button for about a second displays the retroillumination image
observation screen (RETRO ILLUMINATION).
/ / Page switch
Switches the measurement screen among Page 1, Page 2, and Page 3.
CS/PS/PD Switches from AR/KM measurement to CS/PS/PD measurement.
Sagittal Displays the sagittal measurement screen (SAGITTAL).
Eye print Prints the eye diagram of measured data.
CYL mode Switches cylinder (cylindrical refractive error) mode.