Nidek Medical ARK-1S, Operator'S Manual

Page: 99 / 112

93
DEVICE SETTINGS AND MAINTENANCE: Device Parameter Settings
4.5.5 Entering comments
Comments to be printed can be changed. (The default setting is “NIDEK ARK-1s”.)
1
Select “COMMENT SET” in the parameter setting
screen and press the enter
button.
The COMMENT SET screen is displayed.
2
Enter desired comments on the COMMENT SET screen.
In the input field, the currently entered comments are displayed. Up to 24 characters per line with a
maximum of two lines can be input.
After moving the cursor in the character list field to the desired character, press the start button to con-
firm its entry.
3
After setting, press the return button.
Pressing the return button saves the comments and returns to the parameter setting screen.
㸮㸯㸰㸱㸲㸳㸴㸵㸶㸷㸿㹀㹁㹂㹃㹄㹅㹆㹇㹈㹉㹊㹋㹌
㹍㹎㹏㹐㹑㹒㹓㹔㹕㹖㹗㹘㹟㹠㹡㹢㹣㹤㹥㹦㹧㹨㹩㹪
㹫㹬㹭㹮㹯㹰㹱㹲㹳㹴㹵㹶㹷㹸ࠉ㸟͇㸡㸢㸣㸤̓㸦㸧
㸨㸩㸪㸫㸬㸭㸸㸹㸺㸻㸼㸽㸾㹙㻃㹛㹜㹝͂㹹㹪㹻㹼
ࠉ㹎㸿㹐㸿㹋㹃㹒㹃㹐ࠉࠉ㹑㹃㹒㹒㹇㹌㹅
ࠉࠉ㹙㹁㹍㹋㹋㹃㹌㹒ࠉ㹑㹃㹒㹛
㹁㹍㹋㹋㹃㹌㹒㸸
ࠉࠉࠉࠉ㹌㹇㹂㹃㹉ࠉࠉࠉ㸿㹐㹉㸫㸯㹱
&+$1*(6(7
ᵏ
Forward movement /
Backward movement
Moves the character to be input (cursor) in the character list field to the
right or left.
Rotating the upper part of
the joystick
Moves the cursor in the input field to the right or left.
Pressing the start button
Determines the character to be input and moves the cursor to the next
position in the character list field.
Reset
Holding down the button for about a second resets comments to its
default.
Clear
Erases the character at the cursor position in the character list field.
Print
Test prints the comments only.